Valves, air valves, couplings, flow straighteners, fire hydrants and service connection equipment, from DN15 to DN2000.
From individual service connections to transmission mains.
Pressure ratings for every level of the network.
EN 1074, EN 593, EN 1092-2, EN 14384, ISO 2531…
Epoxy coating for a long service life in contact with water.
Isolation, regulation and protection against backflow.
Ref. EAU-001
Full-bore isolating valve for transmission and distribution networks.
Ref. EAU-002
Ref. EAU-003
Isolation or regulation: distribution networks, pumping and treatment stations, irrigation.
Ref. EAU-004
Prevents reverse flow, compact wafer design between flanges.
Air management in pipelines to prevent head losses and water hammer.
Ref. EAU-005
Release of air accumulated at high points of pipelines in service.
Ref. EAU-006
Air release in service, air discharge during filling and air intake during draining.
Connection, adaptation and repair of PVC, HDPE and ductile iron pipes.
Ref. EAU-007
Ref. EAU-008
Ref. EAU-009
Makes it easy to install and remove flanged valves by compensating for pipeline gaps.
Ref. EAU-010
Connection or repair of pipelines: water supply, irrigation, sewerage.
For reliable measurement upstream of water meters and flowmeters.
Ref. EAU-011
Reduces disturbances caused by bends, valves or reducers upstream of a water meter.
Ref. EAU-012
Reduces turbulence for reliable measurement by downstream equipment.
Ref. EAU-013
Above-ground outlets for connecting fire-fighting equipment to a pressurized network.
Everything needed for customer service connections, from the tapping point to the meter.
Ref. EAU-014
Ref. EAU-015
Ref. EAU-016
Ref. EAU-017
No product in this family.
Volta Power supplies water utilities, municipalities, engineering consultancies and water works contractors with the equipment needed to build and maintain drinking water networks, from transmission mains to customer service connections, in Morocco and West Africa.
Our range covers network valves (resilient-seated gate valves from DN50 to DN800, butterfly valves up to DN2000, dual-plate check valves), single- and triple-function air valves for air management in pipelines, connection fittings (flange adaptors for PVC and HDPE pipes, self-restrained dismantling joints, Gibault joints), flow straighteners installed upstream of meters, and DN100 fire hydrants.
For customer service connections, we offer brass meter inlet and outlet valves, tapping saddles, surface boxes, riser boxes and water meter boxes. Ductile iron equipment is protected by an epoxy coating and designed to EN, ISO and DIN standards (EN 1074, EN 593, EN 1092-2, EN 14384…). The full catalogue can be downloaded as a PDF.
The gate valve offers full bore: it is ideal for isolating distribution networks from DN50 to DN800. The butterfly valve, more compact and lighter, suits large diameters (up to DN2000), pumping and treatment stations, and can also be used for regulation.
It releases the air that accumulates at high points of pipelines, which reduces flow and promotes water hammer. A triple-function air valve also discharges air during filling and lets air in during draining, protecting the pipeline against vacuum.
Yes. We offer a version for PVC pipes and a version for HDPE pipes fitted with a brass locking ring, for outside diameters from 40 to 315 mm, in PN10 or PN16.
Send us your bill of quantities or your requirements: we will reply quickly.
